Sanguino/README.md

Sanguino

Developed by Kristian Sloth Lauszus, 2012

The code is released under the GNU General Public License.

---

This is a Sanguino third-party hardware add-on for the Arduino IDE.

To use this add-on simply add the following url: https://raw.githubusercontent.com/Lauszus/Sanguino/master/package_lauszus_sanguino_index.json to the Arduino boards manager. Please see the following page for more information: https://learn.adafruit.com/add-boards-arduino-v164.

Advanced users can install the hardware add-on manually by creating a folder named "hardware" inside your sketchbook directory. Now move the Sanguino directory inside that folder. The structure would look like this:

• Arduino/
  • hardware/
    • Sanguino/
      • avr/
      • bootloaders/
      • variants/
      • README.md
      • boards.txt

PlatformIO

It is also possible to use this add-on with PlatformIO. For instace you can use the Sanguino ATmega644 or ATmega644A running at 16 MHz by creating the following entry in your platformio.ini file:

[env:sanguino_atmega644p]
platform = atmelavr
framework = arduino
board = sanguino_atmega644p

This will also allow you to specify the upload speed by adding the following entry:

upload_speed = 57600

This is needed if you have not burned the Optiboot bootloader.

The list of boards can be found here: http://docs.platformio.org/en/latest/platforms/atmelavr.html#sanguino.

ATmega1284

Since the ATmega1284 is not supported by Avrdude. You will have to burn the bootloader manually from the command line. See this file for help: ATmega1284.md.

Also check out the following site for more information: http://blog.stevemarple.co.uk/2013/01/how-to-use-atmel-atmega1284-non-p.html.

For more information see the following site: http://www.arduino.cc/en/Guide/Environment#thirdpartyhardware or send me an email at lauszus@gmail.com.