disable_overscan=1
start_x=1
gpu_mem=160

# Enable on-board audio
dtparam=audio=on

# Berryboot settings, do not change
initramfs berryboot.img

kernel=kernel_rpi2_aufs.img

[pi3]
# Uncomment this line before installation if you want to enable USB boot
#program_usb_boot_mode=1

# Uncomment this line to prevent continuous SD card polling if using USB/PXE boot
#dtoverlay=sdtweak,poll_once

[pi0]
kernel=kernel_rpi_aufs.img

[pi1]
kernel=kernel_rpi_aufs.img

# Warning: CMA does not work properly in newer firmware versions
#
#cma_lwm=16
#cma_hwm=32
#cma_offline_start=16

[all]